成功案例
     成功案例
     新闻事件
     展会动态
     职业机会
成功案例——灯罩(新款SSV系统)

 

应用案例(Application):灯罩

材料(Resin):PC白色+PC透明 1:1混合

重量(Weight):548g
颜色(Color):白色+透明 

平均壁厚(Wall Thickness):2.8mm
系统(System Type):新款SSV 

热咀点数(Nozzle Qty):1

型腔数(Cavity):1

 

说明 Description:
   1、此产品为灯罩,材料为PC白色与PC透明1:1混合材料而成,需要在透光下没有任何瑕疵,如果熔融温度不均衡时在透光下将会有明显的色差圈,所以需要保证整段热咀温度均衡;

   The product is lampshade which materials are 1:1 mixed white PC and transparent PC.It needs to meet the needs that there are no flaw under the light.If the melting temperature is not balanced, there will be obvious color difference circle. So we need to ensure the temperature of the whole nozzle is good balanced.

 

 

   2、结合产品与材料的特性,采用新款SSV结构,改善温度不均导致的色差问题,从而达到产品的透光度;

   We combined the characteristics of product and materials, the new style SSV structure is adopted to improve the chromatism issue which caused by bad balance temperature.So that to reach the transparency of the product.

 

   3、新结构特点:主射咀发热段与热咀发热段同时加长设计,减短中间对接处不发热距离,保证热量;同时优化了结构,使热量流失减少,从而达到温度平衡;

  New style characteristics: Both the heating segment of nozzle locator and the heating segment of nozzle are lengthen designed at the same time, and shorten the unheated distance of the intermediate junction, to ensure the heat.Meanwhile,it optimizes the construction,which decreases the heat loss, so it can reach the good balance of temperature.

 
版权所有© 先锐模具配件(东莞)有限公司