成功案例
     成功案例
     新闻事件
     展会动态
     职业机会
成功案例- 汽车内饰(倒车影像仪)

应用案例(Application):Automotive Interior (Reversing imager)

材料(Resin):PA66+45%GF

重量(Weight):4gX16

颜色(Color):黑色 black

平均壁厚(Wall Thickness):2.3mm

系统(System Type):THM CC

热咀点数(Nozzle Qty):16

型腔数(Cavity):16

说明 Description:  


1、此产品为倒车影像仪,产品排布间距小、进胶位置小,材料为PA66+45%GF,故选用方形小热咀才能满足产品进胶要求;

  This product is a reversing imager. It has small space between layouts and narrow areas of materials injection. The material is PA66 plus 45% GF. Therefore, it needs to choose a small square nozzle to meet the requirements of materials injection.

2、热咀之间距离排布最小可为12mm,热咀结构特殊设计、咀头材料使用防腐蚀、防磨损材料,有效地保证温度均衡与使用寿命;

  The minimum distance between nozzles can be 12 mm. The special design of nozzle structure, corrosion resistance and wear resistance materials are used to nozzle tip to ensure temperature balance and service life efficiently

3、分流板流道根据分析结果,采用藏胶少、压力小的平衡设计,同时外形最小化设计,温度流失少、保证了整体流道温度均衡;
 

  Manifold runner according to the analysis results, it adopts the balanced design with less hiding materials and less pressure, meanwhile,with the minimization design of the shape, which ensures less temperature loss and the overall temperature balance of the runner.

 

Get the Flash Player to see this player.
 
版权所有© 先锐模具配件(东莞)有限公司